You are here

Add new comment

AutoCAD Civil 3D 2013 Service Pack 1

Download Here!!

This Service Pack includes all previous hotfixes for AutoCAD Civil 3D 2013. It also includes the fixes included in AutoCAD 2013 Service Pack 1.1 and AutoCAD Map 3D 2013 Service Pack 1.

 

 

The following issues have been resolved in AutoCAD Civil 3D 2013 Service
Pack 1:

.NET API

The IsUsed property in StyleBase now reports whether a style is in use by an
AutoCAD Civil 3D object.

Cogo

  • The COGO Editor now accepts Degrees/Minutes/Seconds in a spaced format.
  • The COGO Editor now retains the saved value in the description field.

Corridor Design

  • An issue with the Offset End Station value that prevented a drawing from
    opening has been resolved.
  • Switching between drawings while Station Tracker is enabled no longer causes
    the application to close unexpectedly.
  • An issue that caused errant feature lines to be generated between stations
    has been resolved.

Corridor Volumes

  • An issue where cut/fill volume shading was displaying incorrectly in some
    cross sections has been resolved.

Cross Section Views

  • The Update Section View Layout command no longer causes the application to
    close unexpectedly.
  • Opening a AutoCAD Civil 3D 2010 drawing containing the OverlayAndMill
    subassembly no longer results in a display issue with the section views.

Cross Sections

  • Selecting multiple existing polylines when creating sample lines no longer
    causes the application to close unexpectedly.

Data Exchange

  • An imported structure will now use the expected dimension rather than the
    dimension of the first structure of the imported group.

Feature Lines

  • Creating feature lines from objects when the objects are overlapping closed
    polylines no longer causes the application to close unexpectedly.

General/Other

  • An issue that caused an error when closing a drawing has been resolved.
  • An issue that caused an error when starting AutoCAD Civil 3D after migrating
    settings from a previous release has been resolved.
  • The stability of the Audit command has been improved.
  • Using the Move/Copy/Rotate Express Tool after grip editing an object no
    longer causes the application to close unexpectedly.
  • In drawings with a custom UCS, switching from the model tab to the layout
    tab will no longer reset model tab to isometric.
  • Using your mouse wheel to pan while in a command no longer causes an
    unexpected error.
  • Deleting the last remaining layout while set to model viewin that layout no
    longer causes the application to close unexpectedly.
  • File sync of custom Tool Palettes has been disabled.
  • Opening a drawing by double-clicking on the file no longer causes an
    unexpected error.
  • The performance of tooltips has been improved.
  • North rotation is now calculated as expected between Coordinate Settings and
    Geolocation.
  • An issue that caused an error when saving a drawing has been resolved.

Grading

  • An error while using the Grade to Surface command has been resolved.
  • Deleting a PI from a feature line no longer causes the application to close
    unexpectedly.

Hydraflow Storm Sewers

  • Storm Sewer calculations have been clarified to follow methodologies
    according to HEC-22.
  • Storm Sewers using HDS-5 inlet control option now report expected results.
  • The following issues related to inlet calculations and reporting have been
    resolved:
    • Inlet section view displays spread correctly in 2D when depression is
      ignored.
    • Slotted drains in sag condition now calculate expected depth and spread
      values while transitioning between weir and orifice flow.
    • Open Area Design calculations are now less than or equal to the product of
      grate length and width.
    • A column in theInteractive Designer is now labeled "Local Depression" to be
      consistent with the data-entry field.

Hydraflow Express

  • The following issues related to Inlet calculations and reporting have been
    resolved:
    • Inlet Section View display shows spread correctly in 2D when depression is
      ignored.
    • Slotted drains in sag condition now calculate expected depth and spread
      values while transitioning between weir and orifice flow.
    • Open Area Design calculations are now less than or equal to the product of
      grate length and width.
  • The following issues related to culvert calculations and reporting have been
    resolved:
    • Circular culverts now report consistent tailwater results as expected across
      a flow range.
    • Elliptical culvert calculations now report expected headwater values above
      the crown of the pipe.

Hydraflow Hydrographs

  • Hydrograph plots are now displayed correctly on computers running Windows XP
    32-bit.

Inquiry

  • Switching between drawings while the Profile View Elevation and Grade
    Between Points inquiry command is active no longer causes the application to
    close unexpectedly.

Labels

  • An issue where referenced pipe spanning labels list the incorrect distance
    after reopening a drawing has been resolved.
  • An issue where referenced pipe network labels in section view disappear
    after reopening a drawing has been resolved.
  • Wipeout frames used in styles now display as expected.

LandXML

  • When importing LandXML data, alignments are now imported to the specified
    drawing layer.

Object Enabler

  • Importing a drawing using Navisworks Manage 2013 no longer results in the
    application becoming unresponsive or closing unexpectedly.

Parcels

  • Deleting a PI of a perimeter parcel no longer causes the application to
    close unexpectedly.

Pipe Networks

  • Solid hatching now displays as expected in profile views.
  • Issues recognizing the correct Manning roughness n-value for parts has been
    resolved.
  • Pipe length data is now available in structure tables displaying connected
    pipes.
  • Synchronizing a pipe network with a part swapped in the source drawing now
    updates the style as expected.

Points

  • Creating a point no longer fails if a survey point with the same number
    already exists in the drawing.
  • Assigning user-defined properties to a point group from the Summary tab no
    longer results in the application closing unexpectedly.
  • The next point number is now assigned correctly when creating points from
    objects.

Pressure Networks

  • Deleting pressure networks while the Pressure Network panorama is open no
    longer causes the program to close unexpectedly.
  • Minimum radius values for curved pipes are now updated when changing pipe
    sizes during layout.
  • Quantity takeoff reports now list lengths of pressure pipe when linear pay
    items are assigned.

Profiles

  • Grip editing a PVI marker with OSNAP enabled no longer causes the
    application to close unexpectedly.
  • Linetypes used for profiles that are referenced now appear as expected.

Project Management

  • Drawings with circular dependencies now generate a prompt when being checked
    in.
  • An error is no longer generated when checking in a drawing with a reference,
    when the reference drawing is checked out by another user.

Quantity Takeoff

  • The Pay Item and Pay Item Categorization files now default to the previously
    browsed path.

Reports

  • The PVI Station and Curve report is now generated correctly when the ambient
    setting for Grade/Slope format is set to Per Mille.

Shortcuts

  • An issue that allows the same profile object to be mapped to two different
    parent alignments has been resolved.
  • Performance when opening a drawing containing references has been improved.

Superelevation

  • The diagram in the Create Superelevation View dialog box is now displayed as
    expected when the alignment is referenced.

Surface

  • Watershed analysis performance on DEM surfaces has been improved.
  • The Drape Image command no longer results in a reversed image when hardware
    acceleration is enabled.
  • The stability of the Level of Detail command has been improved.
  • The stability of the Resolve Crossing Breaklines command has been improved.

Survey

  • The lower pane of Figure Properties dialog box now displays the Import
    Events as expected.
  • Modifying figure data in Figure Properties dialog box no longer causes the
    application to close unexpectedly.
  • Editing Chain Type Figure Properties no longer causes the layer to reset to
    0.

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.