Submitted by tomshumpert on Tue, 04/09/2013 - 11:56
While installing a Civil 3D and a Acad 2012 package from a deployment I came across DirectX Runtime Failed Failure is ignored, Result=1619.
After hours of searching and trial and error here was my solution:
Modify your deployment and uncheck silent install. This will give you a better indication on what is failing.
Come to find out .NET 4.0 was not installed/installing so I manually installed .Net off the microsoft website and re-ran deployment and it worked fine!
Submitted by tomshumpert on Fri, 04/05/2013 - 12:48
Submitted by tomshumpert on Thu, 04/04/2013 - 08:37
Submitted by tomshumpert on Tue, 02/19/2013 - 07:07
Submitted by tomshumpert on Mon, 12/03/2012 - 07:20
Download Here!!
This Service Pack includes all previous hotfixes for AutoCAD Civil 3D 2013. It also includes the fixes included in AutoCAD 2013 Service Pack 1.1 and AutoCAD Map 3D 2013 Service Pack 1.
The following issues have been resolved in AutoCAD Civil 3D 2013 Service
Pack 1:
Submitted by tomshumpert on Wed, 11/28/2012 - 06:14
I have recently have had issues with my external HD's becoming "read-only". Not sure why yet, but here is the fix.
DISKPART
Open the command prompt box "CMD" at Run
Submitted by tomshumpert on Tue, 11/27/2012 - 11:22
Submitted by tomshumpert on Tue, 11/13/2012 - 07:43
Need to Reverse the order of your PDF file for plotting?
There is no command to reverse the order of the pages in Acrobat.
You have to:
Run this from the JavaScript Console (Ctrl+J):
for (i = this.numPages - 1; i >= 0; i--) this.movePage(i);
Hope this Helps.
Submitted by tomshumpert on Thu, 11/01/2012 - 14:04
Have you ever needed to setup a Site plan with a GRID coordinate format?
Here is what you do:
First off you will need to make sure your Coordinate sytem is setup in the drawing you have referenced your overall drawing into. You don't want to set transformation in the original file.
Click on the Tranformation Tab and check "Apply tranform settings"
Pages
